|
Product Details:
|
| Product Name: | Mild Steel CD Spot Welding Pins | Material: | Stainless Steel ,carbon Steel ,copper |
|---|---|---|---|
| Surface Treatment: | Copper Plated And Galvanized | Diameter: | 2.7mm ,3.0mm,3.4mm |
| Pin Length: | 30-200mm | OEM/ODM: | Support |
| Design Style: | Traditional | Accessories: | Insulation Washer ,dome Cap Washer |
| High Light: | dome cap washer cuphead weld pins,10ga cuphead weld pins,10ga cup head pins for insulation |
||
The CD copper coating weld pin is a capacitor discharge weld insulation fastener, these insulation weld pins
work with a stud welding machine, weld the pins on the sheet metal, then put the insulation material through
the weld pins, press a self locking washer or metal clips or dome caps onto the pin, bend over or clip off the
pin to finish fastening insulation installation. Weld nails are usually used shipping industry.
Weld pins are used for attaching insulation to various metals, with the use of a CD Welder. After the pin
is welded in place, the insulation is impaled on the pin and secured with a self-locking washer.
small orders are available, free smaples are acceptable for common size of weld pins. door to door service
is available !
| Specification of mild steel CD welding pins | |||||
| 10ga(3.4mm) | 12ga(2.7mm) | ||||
| PIN DIA | Flange Dia | Pin Length | Pin dia | Flange dia | pin length |
| 3.4mm | 5.6mm | 1" | 2.7mm,3mm | 4.5mm | 0.75" |
| 3.4mm | 5.6mm | 1.5" | 2.7mm,3mm | 4.5mm | 1" |
| 3.4mm | 5.6mm | 2" | 2.7mm,3mm | 4.5mm | 1.25" |
| 3.4mm | 5.6mm | 2.5" | 2.7mm,3mm | 4.5mm | 1.5" |
| 3.4mm | 5.6mm | 3" | 2.7mm,3mm | 4.5mm | 2'' |
| 3.4mm | 5.6mm | 3.5" | 2.7mm,3mm | 4.5mm | 2.5" |
| 3.4mm | 5.6mm | 4" | 2.7mm.3mm | 4.5mm | 3" |
| 3.4mm | 5.6mm | 4.5" | 2.7mm.3mm | 4.5mm | 3.5" |
| 3.4mm | 5.6mm | 5" | 2.7mm.3mm | 4.5mm | 4' |
| 3.4mm | 5.6mm | 5.5" | 2.7mm.3mm | 4.5mm | 4.5" |
| 3.4mm | 5.6mm | 6" | 2.7mm.3mm | 4.5mm | 5" |
| 3.4mm | 5.6mm | 6.5" | 2.7mm.3mm | 4.5mm | 5.5" |
| 3.4mm | 5.6mm | 7" | 2.7mm.3mm | 4.5mm | 6" |
| 3.4mm | 5.6mm | 8" | 2.7mm.3mm | 4.5mm | 7" |
| 3.4mm | 5.6mm | 10" | 2.7mm.3mm | 4.5mm | 8" |
|
Features of Capacitor discharge weld pin |
|
|
BETTER PLATING |
weldpin shanks Zinc and Chromate plated exceeding SMACNA standards and providing a professional appearance.Climatech weldpin shanks are copper plated. |
|
REDUCED DOWN TIME |
Consistent point quality reduces frequency of machine adjustments. |
|
STRONGER WELDS |
Hardened steel point assures positive electrical contact for complete sheet to pin fusion. |
|
CORROSION RESISTANCE |
Plating exceeds current SMACNA standards for corrosion resistance. |
|
TEMPERATURE RANGE |
CD Weld pins function properly over normally accepted operating range of temperatures of 0 degrees C to 121degrees C and are not adversely affected at temperatures of 0 degrees C to 287 degrees C. |
|
VIBRATIONS |
CD Weld pins will not fatigue or be physically affected by vibrations normally found in high velocity air handling systems. |
thermal power station with incineration plants
industrial furnaces,chemical and petrochemical industries
optimum fastening of fire-resistant insulation with special pin and clips
for outstanding protection of steel structures
against high temperature(up to 1250 ℃) and corrosion
fixing parts of the cd weld pins
the pins could be fixed with round self locking washers,square self locking washers ,dome cap washers
Hebei Xiangyi metal products company is a insulation fasteners/insulation anchors manufacturing
company,we produce all kinds of insulation pins and washers.can make mold according your drawing
pic ,Our products is as following :
CD weld pins Lacing Anchors
bimetallic pin Cup head weld pins
Quilting pins perforated base pins
self adhesive pins aluminum solar panel mesh clip
all kinds of self locking washers, Dome caps.
Contact Person: admin
Tel: 86-17731133925
