|
Product Details:
|
| Name: | Perforated Insulation Fixing Pins | Company Type: | Manufacturer |
|---|---|---|---|
| Base Material: | High Hardness Steel | Base Size: | 2" X 2" (50 X 50mm ) |
| Shank Material: | Anneaded Steel Wire / Stainless Steel Wire / Aluminum Wire | Pin Diameter: | 12 Ga ( 2.7 Mm ) , 3 Mm In Standard |
| Application: | Heating, Ventilation And Air Conditioning (HVAC) Systems | Shank Length: | 15 MM - 280 MM |
| High Light: | 50 mm perforated insulation pins,stainless steel fixing perforated insulation pins,attaching materials perforated insulation pins |
||
|
Name: 50mm Stainless Steel Perforated Insulation Fixing Pins Used For Attaching Insulation Materials Factory: Xiangyi Parts Base Material: stainless steel Base Size: 50x50mm Base Thickness: 0.4mm Pin Diameter: 2.7mm Pin Length: 50mm Self locking washers: 30mm
|
 |
Base size in common: 40mmx40mm, 50mmx50mm
Pin diameter in common: 2mm, 2.5mm, 2.7mm, 3mm and 10ga (3.4mm)
Pin length in common: 50mm, 63mm, 90mm, 114mm, 125mm, 175mm, 203mm, 230mm
Surface treatment: zinc coated or copper coated for mild steel material
|
Material available |
|
|
Pin material |
-mild steel: must be annealed treatment, easy for bend; zinc coated/copper plated finished for anti-rust -aluminum 1100 grade -annealed stainless steel for specification |
|
Base |
Galvanized steel, stainless steel |
|
Common Size Details |
|||
|
base type |
pin diameter |
pin length |
material thickness |
|
25 mm x 25 mm |
1.8 mm , 2.0 mm |
20 mm - 114mm |
0.4 mm |
|
40 mm x 40 mm |
2.5 mm |
20 mm -180mm |
0.4 mm |
|
50 mm x50 mm |
2.7 mm , 3.0mm |
50 mm - 280mm |
0.4 mm |
|
1. Wipe surface clean Perforated insulation hangers must be applied to a clean, dry, non-painted surface. |
|
2. Apply adhesive to the bottom of the perforated insulation hangers Spread adhesive onto the perforated base with a putty knife. |
|
3. immediately stick the insulation hangers in place. Press the hangers into position with a twisting motion to assure an even spread of adhesive. The adhesive should protrude through the performation & beyond the edges of base. |
|
4. Install Insulation Note: allow adhesive to dry thoroughly before hanging insulation, usually 24-72 hours. |
|
5. Secure with washers Secure insulation in place with a self locking washer and then bend over or clip off the pin |
|
PIN LENGTH |
CARTON SIZE |
QTY/CARTON |
|
38MM |
41CMX28CMX17CM |
1000PCS |
|
50MM-65MM |
41CMX28CMX17CM |
500PCS |
|
70MM-84MM |
30CMX28CMX29CM |
500PCS |
|
90MM-120MM |
30CMX30CMX30CM |
500PCS |
|
130MM-160MM |
30CMX30CMX35CM |
500PCS |
|
170MM-203MM |
30CMX30CMX28CM |
250PCS |
|
OTHERS |
SUPPORT CUSTOM |
|
|
||
1. Are you manufacture or trader?
2. Do you support product customization?
3. Can you accept small order?
4. Can i get samples?
5. What is your advantages?
Contact Person: admin
Tel: 86-17731133925
