|Name:||Self Stick Insulation Pin Nails||Package:||500/1000 Pcs Or To Be Request|
|Material:||Carbon Steel ,stainless Steel ,aluminum||Surface Treatment:||Galvanized ,polished|
|Base Size:||50x50mm, 40x40mm ,35x35mm,25x25mm||Pin Diameter:||12 Ga,14 Ga|
carbon steel insulation fasteners,
self speed clips insulation fasteners,
carbon steel insulation pins
|Material||carbon steel in commom ,also could be stainless steel and aluminum|
|Base size||50x50mm in common ,40x40mm,30x30mm ,25x25mm to be request|
|Base type||flat washer type and stamp pattern washer type|
|Base thickess with stick tape||1 mm|
|Pin diameter||2.7mm in commom ,3.0mm 1.5mm to be request|
|Pin length||1” 1-2″ 2″ 2-1/2″ 3″ 4″ 5″|
|Install Parts||round washer ,square washer ,dome cap washer|
Self-stick insulation pin nails product introuduce:
Self-stick insulation pin nails as the name implies, a self-adhesive coating on the bottom of the large
base. This makes the pins easy to use and are especially effective on smooth and high surface
energy surfaces such as metals. No need for any additional adhesive or equipment. These pins
are most commonly used in combination with blanket, wraps and (semi-) rigid board. The pins come
with the appropriate clips to secure the insulation and are available in different lengths.
|Pin diameter||Base size||Pin length in common||self locking Clips Size|
|1”||round type/ square type|
The user is responsible for determining the suitability of the application.
Hangers must be applied to a clean, dry, non-porous surface that is free of all oil, films, dust, rust, etc.
Self-adhering hangers are not recommended for concrete or painted surfaces.
It is important that they not be used where operating temperatures can exceed 150° F at the point of adhesion.
Hangers should not be used on ceilings or roofs of metal buildings or any surface the reverse side of which may be exposed to
heat concentration from sunlight, etc.
Contact Person: admin