|Product Name:||Self Adhesive Insulation Pin Nail||Material:||Carbon Steel ,stainless Steel ,aluminum|
|Base Plate:||50mmx50mm||Pin Diameter:||2.7mm,3.0mm|
|Pin Length:||30-200mm||Packing:||500 Pcs Or 1000 Pcs In One Carton|
|OEM,ODM:||Support||Application:||Fixing Rock Wool Layer|
Self Adhesive Insulation Pin Nail,
50mmx50mm Self Adhering Insulation Pins,
Self Adhesive Metal Insulation Pins
Square type base: 50mmx50mm / 1mm
Pin diameter: 12ga (2.7mm), 3mm in common
Pin Material: anneaded mild steel wire, anneaded stainless steel wire for sperical orders.
Pin Finished: zinc coated, copper plating
Pin length: from 38mm to 230mm, others can be customization.
Installation parts: including round self locking washer, square self locking washer and dome cap washers
Rock wool fixing insulation nail pin is exclusively used for fixing adiabatic materials in ducts of air-conditioner,
for glass-wool and rock-wool in soundproofing works,and for the duct-lining.
|Self Adhesive Pins|
|Product size||Pin length: 1-1/4” - 8”|
|Pin diameter:12GA ,14GA|
|Base size : 2”*2”|
|Material||Pin: Stainless steel, Aluminum, Stainless steel|
|Base: usually galvanized steel, stainless steel ,aluminum acceptable|
|Surface treatment||Galvanized , Polished|
|Features||Firm conjunction between pins and bases|
|Pins are soft, easy to bend|
|Excellent stickness for double-sided adhesive property|
|Length tolerance ±0.1mm|
Packing can be customized as per requirements, current packing information
available upon request.
|Application||Fixing various insulation blankets and boards|
|Remark||Technical parameters are available upon request|
Hebei Xiangyi metal products company is a insulation fasteners/insulation anchors manufacturing company,
we produce all kinds of insulation pins and washers.can make mold according your drawing pic ,Our products
is as following :
CD weld pins Lacing Anchors
bimetallic pin Cup head weld pins
Quilting pins perforated base pins
self adhesive pins aluminum solar panel mesh clip
all kinds of self locking washers, Dome caps.
1. Work surfaces should be clean and dry, free of dust, grease, oil and any other loose matter.
2. Remove the protective release paper taking care not to touch the adhesive.
3. Place the hanger in the required position and press the base against the surface to be insulated
4. Insulation can be impaled immediately and firmly locked with fastening clips but maximum strength
of adherence is achieved after 24 hours.
Exclusively used for fixing adiabatic materials in ducts of air-conditioner, for glass-wool and rock-wool in
soundproofing works,and for the duct-lining.
Contact Person: Jingru