|
Product Details:
|
| Name: | Bimetallic Weld Pins | Base Type: | Aluminum Flange |
|---|---|---|---|
| Base Size: | M3*70mm | Pin Diameter: | 3mm In Common |
| Pin Mateiral: | Carbon Steel Or Stainless Steel | Pin Length: | 30-200mm |
| Pin Type: | CD Weld Nails | Technical: | Stamped |
| Sample: | Available | MOQ: | 50000 Sets |
| High Light: | M3x70mm Bimetallic weld pins,Bimetallic weld pins,rockwool insulation pin |
||
Quick details of the Bimetallic Weld Pins
Material: aluminum base +carbon steel /stainless steel material shaft
Base size :M3*70mm
Pin dia:3.0mm or customized
Total length:30-200mm , could be customized .
 |
||||||
|
Material |
Material B |
ø d1 |
ød2 | øD |
Total length |
Packing methods |
|
Aluminum |
Carbon steel or Stainless steel |
6mm |
3mm | 9mm |
40mm |
300pcs in one plastic bag, then put the bags into cartons, and then packed with pallets or wooden case |
|
Aluminum |
Carbon steel or Stainless steel |
6mm |
3mm | 9mm |
50mm |
|
|
Aluminum |
Carbon steel or Stainless steel |
6mm |
3mm | 9mm |
55mm |
|
| Aluminum | Carbon steel or Stainless steel | 6mm | 3mm | 9mm | 60mm | |
|
Aluminum |
Carbon steel or Stainless steel |
6mm |
3mm | 9mm |
75mm |
|
|
Aluminum |
Carbon steel or Stainless steel |
6mm |
3mm | 9mm |
90mm |
|
|
Aluminum |
Carbon steel or Stainless steel |
6mm |
3mm | 9mm |
114mm |
|
| Note: the pins material ans length could be customized for large order | ||||||
|
features of the Bimetallic Weld Pins |
|
|
BETTER PLATING |
weldpin shanks Zinc and Chromate plated exceeding SMACNA standards and providing a professional appearance.Climatech weldpin shanks are copper plated. |
|
REDUCED DOWN TIME |
Consistent point quality reduces frequency of machine adjustments. |
|
STRONGER WELDS |
Hardened steel point assures positive electrical contact for complete sheet to pin fusion. |
|
CORROSION RESISTANCE |
Plating exceeds current SMACNA standards for corrosion resistance. |
|
TEMPERATURE RANGE |
CD Weld pins function properly over normally accepted operating range of temperatures of 0 degrees C to 121degrees C and are not adversely affected at temperatures of 0 degrees C to 287 degrees C. |
|
VIBRATIONS |
CD Weld pins will not fatigue or be physically affected by vibrations normally found in high velocity air handling systems. |
The fixing parts could be dome cap washers , plastic caps with metal clip, round self locking washers .
| Dome cap washers | Self locking washers | |
| Metal cap +clips | Plastic cap + metal clips | Type :3 slots washers |
|
|
|
XIANGYI METAL PRODUCT CO.,LTD
|
Carbon steel or Stainless steel |
Contact Person: dong
Tel: 18732199987
