Product Details:
|
Name: | Insulation Stick Pins | Manufacturer: | Hebei Xiangyi Metal Product Co.,ltd |
---|---|---|---|
Base Material: | Galvanized Steel Or Stainless Steel | Base Size: | 50x50mm |
Pin Material: | Galvanized Steel Or Stainless Steel Or Aluminum | Pin Dianeter: | 2.7mm, 3.0mm, 3.4mm |
Samples: | Supported | Pin Length: | 38mm-230mm In Standard |
High Light: | 230mm insulation stick pins,galvanized steel insulation stick pins,duct insulation stick pins |
Insulation stick pins with washers are used to secure the duct insulation to the ductwork or fix
the insulation on smooth surfaces such as attenuators, chambers and enclosures.
|
||||||||||||||||
|
Popular sizes of the insulation stick pins |
||||
material | base size | pin diameter | pin length | fixed parts |
pin material:anneaded steel wire anneaded stainless steel wire aluminum wire base material:hardness steel stainless steel |
base size: 50x50mm base thickness: 0.4mm adhesive thickness: 1mm base type: double adhesive liner: siliconized paper |
2.7mm | 38mm |
self locking washer doom cap washer |
2.7mm | 45mm | |||
2.7mm | 55mm | |||
2.7mm | 62mm | |||
2.7mm | 90mm | |||
2.7mm,3.0mm | 114mm | |||
2.7mm,3.0mm | 120mm | |||
2.7mm,3.0mm | 140mm | |||
2.7mm,3.0mm | 160mm | |||
2.7mm,3.0mm | 180mm | |||
2.7mm,3.0mm | 203mm | |||
2.7mm,3.0mm | 230mm |
Self locking washers of the insulation stick pins |
||||
Type | Size | Material | Ceter hole | Picture |
round |
30mm 32mm 38mm |
galvanized steel, stainless steel, aluminum | 2mm-5mm | ![]() |
square |
32mmx32mm 29mmx31mm 65mmx65mm |
galvanized steel, stainless steel, aluminum |
2mm- 5mm |
![]() |
dome cap |
30mm 32mm 38mm |
galvanized steel, stainless steel, aluminum | 2mm-5mm | ![]() |
1. Install at ambient temperatures above 10° C (preferably between 15 and 25° C)
2. Surfaces should be clean and dry, free of dust, grease, oil and any other loose matter
3. Remove the protective release paper,taking care not to touch the adhesive
4. Place the insulation stick pins in the required position and press the base against the surface
to be insulated
5. Insulation can be impaled immediately and firmly locked with fastening clips or washers,
but maximum strength of adherence is achieved after 24 hours
6. If necessary, cover the pin with a protective nylon cap
1.We choose the best quality materials for making insulation fasteners
2.We do copper plating, zinc coated and phosphating pretreatment for the raw material using
drawing machine.
3.We purchase the multi-station cold forging machine to ensure the better mechanical property
of shear connector to match the standard (BS EN ISO13918:2008, AWS D1.1, etc.),
or as per customer's special requirement.
4.We use the automatic riveting machine to install .
5.After rust prevention, XIANGYI insulation fasteners can suitable for long time ship on the sea.
6.Short delivery time because of our reasonable production flow management.
Contact Person: XinJie
Tel: +8618031853647