|
Product Details:
|
| Name: | Self Stick Insulation Hangers For HVAC System | Material: | Galvanized Steel Or Stainless Steel |
|---|---|---|---|
| Base Size: | 40x40, 50x50 Etc. | Base Thickness: | 0.4mm |
| Pin Diameter: | 2.7mm, 3.0mm Etc. | Pin Length: | 15mm-180mm |
| Package Design: | Supported | Special Size: | Supported |
| High Light: | galvanized steel self stick insulation hangers,2-1/2" self stick insulation hangers,hvac self adhesive insulation hangers |
||
Self-stick insulation hangers are designed to fix efficiently insulation on smooth surfaces
such as air ducts, attenuators, chambers and enclosures.
Self stick insulation hanger consists of a pin, firmly riveted on a high quality self-adhesive base.
|
Item |
Self Stick Insulation Hangers |
|
Material |
Galvanized steel or stainless steel |
|
Base size |
50x50mm |
|
Base thickness |
0.4mm |
|
Adhesive thickness |
1.0mm |
|
Pin diameter |
2.7mm |
|
Pin length |
2-1/2" / 63.5mm |
|
Accessories |
Self Locking Washers |
| Advantages |
1. The pins are riveted on the base of the self stick insulation hangers, it's very strong. 2. The self adhesive tape on the base botom of the self stick insulation hangers is very sticky. 3. The self locking washers are very hard, it could lock the self stick insulation hangers very firmly. |
|
 |
|
|
Base |
Material |
Galvanized Steel |
Stainless Steel |
|
|
Base Size |
50 x 50 mm 40x40mm |
|||
|
Base Thickness |
0.4 mm (28 ga) |
|||
|
Pin |
Material |
Galvanized / Copper Plated Steel |
Aluminum |
Stainless Steel |
|
Diameter |
2.7 mm (12 ga), 3mm (11ga) |
|||
|
Length |
19 to 400 mm |
45 to 165 mm |
25 to 400 mm |
|
|
Adhesive |
Thickness |
1 mm (1/25") |
||
|
||||
Polyethylene foam with aggresive pressure sensitive rubber resin adhesive.
Service Temperature : -40 deg C to +70 Deg C
Highly Resistant to abrasion, corrosion and moisture.
Confirms to European Directive 2000/53 (Lead, Chromium VI, Mercury, Cadmium free)
10 Minutes 180 degree Peel Adhesion : 30 N/25mm
500 Hour static shear ( Stainless Steel) : 0.8 kg/cm3
Installation Of The Self Stick Insulation Hangers For HVAC System:
1. Install at ambient temperatures above 10° C (preferably between 15 and 25° C)
2. Surfaces should be clean and dry, free of dust, grease, oil and any other loose matter
3. Remove the protective release paper,taking care not to touch the adhesive
4. Place the self adhesive insulation pins in the required position and press the base against
the surface to be insulated
5. Insulation can be impaled immediately and firmly locked with fastening clips or washers,
but maximum strength of adherence is achieved after 24 hours
6. If necessary, cover the pin with a protective nylon cap
|
|
PIN LENGTH |
CARTON SIZE |
QTY/CARTON |
|
38MM |
41CMX28CMX17CM |
1000PCS |
|
50MM-65MM |
41CMX28CMX17CM |
500PCS |
|
70MM-84MM |
30CMX28CMX29CM |
500PCS |
|
90MM-120MM |
30CMX30CMX30CM |
500PCS |
|
130MM-160MM |
30CMX30CMX35CM |
500PCS |
|
170MM-203MM |
30CMX30CMX28CM |
250PCS |
|
OTHERS |
SUPPORT CUSTOM |
1. Are you a manufacture or a trader?
We are a manufacture, located in Hebei province, China.
2. Do you support product customization?
Yes, the material, the surface finish, the size, all could be customized.
3. Do you support package customization?
Yes, the package could be customized according to your need.
4. Can i get samples?
Yes, samples for quality confirm are supported.
5. Can you accept small orders?
Yes, for common size, we could accept small orders.
Contact Person: admin
Tel: 86-17731133925
